Sale!
25M CAT6 Extension Outdoor/External Cable Kit - RJ45 Network Ethernet Face Plate

25M CAT6 Extension Outdoor/External Cable Kit – RJ45 Network Ethernet Face Plate

£39.99 £33.99

(as of 17/02/2018 at 21:41 GMT)

Product Description

25m CAT6 Extension Kit – External Copper CAT6 Cable Supplied

Why Buy – The cable can be cut to the length required during installation for a professional finish. This kit is supplied with high grade pure copper outdoor CAT6 cable, for running from a network point such as a network switch or router to another location where either internet or network access is required (commonly installed when wireless is not possible).

Cable clips are supplied for securing the cable to a wall or another surface & two brick buster plates are supplied for covering drilled brickwork where a cable enters or exits the exterior of a building. They can be fitted with silicone and will help prevent the ingress of water into the hole in the brickwork. The network face plates have a colour coded wiring diagram on the rear (TIA/EIA-568-B) and the IDC tool can be used to attach the CAT6 cores in the correct order at both sides. Standard pre-terminated CAT6 cables can then be connected to both the face plates to make a high quality CAT6 extension capable of 10Gbps (providing your total cable extension does not exceed 50m otherwise the data speed will drop down to 1GBps).

After you have made the extension, we would recommend testing with a ‘Network Tester’ which we also sell in our shop if you don’t have one. If you require further technical details or would like help installing, please don’t hesitate to contact us.

What’s Included?

— 25m CAT6 (4 Pair) Outdoor Cable – Copper 0.20mm² 24AWG – Gel Filled – Double Insulated – UV Resistant – Cold & Damp Tolerant
— 2 x CAT6 Face Plates with Screws
— 2 x 16mm Surface Mount Back Box
— 2 x Brick Buster Plates
— 100 x 7mm Cable Clips
— 1 x IDC Tool

Features

  • CableFinder Official High Quality Product – Don’t Accept Any Imitations!
  • The cable can be cut to the length required during installation for a professional finish. This kit is supplied with high grade pure copper outdoor CAT6 cable, for running from a network point such as a network switch or router to another location where either internet or network access is required (commonly installed when wireless is not possible).
  • 25m CAT6 (4 Pair) Outdoor Cable – Copper 0.20mm² 24AWG – Gel Filled – Double Insulated – UV Resistant – Cold & Damp Tolerant
  • 1 x IDC Tool & 100x 7mm Cable Clips
  • — 2 x CAT6 Face Plates with Screws
    — 2 x 16mm Surface Mount Back Box
    — 2 x Brick Buster Plates
    — 100 x 7mm Cable Clips
    — 1 x IDC Tool
SKU: B00RLG23JC Category:

Reviews

There are no reviews yet.

Be the first to review “25M CAT6 Extension Outdoor/External Cable Kit – RJ45 Network Ethernet Face Plate”